Perhaps I am searching using the wrong key words! Not hard at all, i was just applying it after parking like i always do. I need to replace the driver's seat but despite webs surfing a few days I can't find anyplace that sells replacement seats other than sites that sell very custom replacement for racing,etc. No part of the seatbelt is affixed to the interior of the cab. The break is in the first picture with the screw driver pointing at it. The manual knob did nothing in either direction! My seat is cloth, has self contained seat belt seat belt totally attached to seat versus any part of interior of truck , and has power movement but manual recline and lumbar support. Well my drivers seat manual lumbar support made the popping sound on the way home and my lower back sunk deep into the seat. Its not easy to find one in a junkyard however.
Topics in this area contain discussion of door panels and headliners or the dash and carpet, trim, and seats. Next was the other hook and I carefully repeated same thing as the first hook. We'll see how long those 2 zip ties last, if they break then I'll just make it 3 or 4 next time. The rig I have has the seat belt totally integrated into the drivers seat. The back of the seat the part your back rests against has twisted when a heavy person was reaching into the back of the cab for an item on the back seat. Read our to see people who found humor in a bad situation.
The lumbar support is in an annoying position so i'd like to get it fixed. Anybody had this happen to them before, and if so what did you do to fix it. Man, the stuff is flimsy, i can see why it broke. Im gonna have to open it up and take a look, if its just a tab like the link that was posted and I can rig it, ill be happy. I'll snap a picture of it, in a bit. I pulled a sticker off of it with what i thought were part numbers, but neither show up in the search at gmpartsdirect.
The complaints are organized into groups with data published by vehicle, vehicle component, and specific problem. Bucket seat, driver seat, without power lumbar. Once I finished I went up front and tested it out a few times and had my girlfriend test it out while I made sure the 2 zip ties on the left side wouldn't break. Attachments lumbar support bracket and steel anchor busted! Went to the site and definitely a comprehensive catalog. There were two plastic hooks on the top, 2 tabs on the left side, 2 tabs on the right side, and 2 across the bottom. Talk about your center console, seats, door handles, upholstery, steering wheels or any other item in the cab of your pickup.
Couldn't find any information on this, so here is mine. . Here at Quirk Parts we strive for 100% customer satisfaction. The last picture shows what the left side looks like unbroken and with a factory zip tie. The back panel is off and undamaged. I used a micro torch and melted the broken plastic back together,, worked great. Ha, i knew someone would ask that.
I would appreciate it if anyone here can point me in the right direction toward a place to sells replacement seats. When i press the buttons nothing happens at all. Reinstalled the back panel, bottom tabs first, left and right sides, and then used the long flat head screw driver to push the hooks down and over the bar. If you have a for-profit service,. I litterally have to have my left leg to the doorside to support myself to drive, no matter how I move the seat with the power buttons, up down, forwards backwards, I can not get around it. Once both top hooks were free I was able to slide my arm down both sides and release the tabs off the left and right sides.
First I grabbed a long flat head screw driver, carefully pulling the lip back, I used the screw driver to push the first hook down and under the bar holding it. Split bench seat, driver seat, with power. I have the proverbial stupid question. If anyone knows where I can find such a seat I would appreciate it! I would like to take a look and see what happened? Im not an overly large dude either, im only about 6'4 - 225. I dont trust it though mine are very brittle.
I took a quick peek under the seat to see if I saw anything out of place, all good there. Also, the drivers arm rest is loose and doesn't stop where it should; just falls all the way down to the seat. I just pushed down the plastic panel and then pulled out. Then I released the last 2 tabs on the bottom. Unfortunately I didn't get it taken care of and now i'm about 6 thousand miles out of bumper to bumper warranty. I could not find any driver's seats there that had the built in seatbelt. On most of the catalog sites I have been to I actually can't find a chair or seat in them.